Electrician AC single phase motor Page-8 Question Bank

36.  What is the effect in a repulsion motor, if the magnetic axis shifted to another side?
प्रतिकर्षण मोटर में क्या प्रभाव होता है, यदि चुंबकीय अक्ष दूसरी तरफ स्थानांतरित हो जाता है?  [Bharat Skill QB]

(A) Direction of rotation will change
 रोटेशन की दिशा बदल जाएगी
(B) Direction of rotation remains same
 रोटेशन की दिशा समान रहती है
(C) Motor speed increases from rated speed
 मोटर की गति रेटेड गति से बढ़ जाती है
(D) Motor speed will reduce from rated speed
 मोटर की गति रेटेड गति से कम हो जाएगी

37.  What is the effect if the centrifugal switch is not disconnected after the motor starts?
मोटर शुरू होने के बाद अपकेंद्री स्विच को डिस्कनेक्ट नहीं किया जाता है तो क्या प्रभाव पड़ता है?  [Bharat Skill QB]

(A) Motor will run normally
 मोटर सामान्य रूप से चलेगी
(B) Motor will stop immediately
 मोटर तुरंत बंद हो जाएगी
(C) Starting winding will burn out
 स्टार्टिंग वाइंडिंग जल जाय`गी
(D) Motor will run very slow speed
 मोटर बहुतधीमी गति से चलेगी

38.  How the direction of rotation of repulsion motors is to be reversed?
प्रतिकर्षण मोटर्स के रोटेशन की दिशा को कैसे उल्टा करना है?  [Bharat Skill QB]

(A) By shifting the brush- axis
 ब्रश-अक्ष को स्थानांतरित करके
(B) By interchanging the supply terminals
 आपूर्ति टर्मिनलों को आपस में बदल करके
(C) By changing the main winding terminals
 मुख्य घुमावदार टर्मिनलों को बदलकर
(D) By changing the compensating winding terminals
 कम्पन्सेटिंग वाइंडिंग टर्मिनलों को बदलकर

39.  Why a capacitor is connected across centrifugal switch in the centrifugal switch speed control method?
क्यों एक संधारित्र अपकेंद्री स्विच गति नियंत्रण विधि में अपकेंद्री स्विच से जुड़ा हुआ है?  [Bharat Skill QB]

(A) To maintain constant speed
 निरंतर गति बनाए रखने के लिए
(B) To protect from over loading
 ओवर लोडिंग से बचाने के लिए
(C) To improve the power factor
 पॉवर फैक्टर को बेहतर बनाने के लिए
(D) To reduce the sparks in contacts
 संपर्कों में स्पार्क कम करने के लिए

40.  What is the effect, if some slots in a split phase motor left out without winding after completion of concentric winding?
प्रभाव क्या होता है, यदि संकेंद्रित वाइंडिंग के पूरा होने के बाद स्प्लिट फेज मोटर में कुछ स्लॉट बिना वाइंडिंग के छोड़े गए हैं?  [Bharat Skill QB]

(A) Works normally
 सामान्य रूप से काम करता है
(B) Reduction in speed
 गति में कमी
(C) Reduction in torque
 टार्क में कमी
(D) Runs with very high speed
 बहुत तेज गति से दौड़ता है