Electrician DC motor Page-10 Question Bank

46.  Where D.C compound motors are preferred?
कहाँ D.C मिश्रित मोटरों को प्राथमिकता दी जाती है?  [Bharat Skill QB]

(A) Constant load requirements
 लगातार लोड आवश्यकताएं
(B) Constant speed requirements
 नियत गति की आवश्यकताएं
(C) High starting torque requirements
 उच्च आरंभिक बलाघूर्ण आवश्यकताएं
(D) Constant speed under varying load requirements
 अलग-अलग लोड आवश्यकताओं के अनुसार नियत गति

47.  What is the necessity of starter for D.C motor?
D.C मोटर के लिए स्टार्टर की क्या आवश्यकता है?  [Bharat Skill QB]

(A) Limit the field current
 फ़ील्ड धारा को सीमित करें
(B) Limit the field voltage
 फ़ील्ड वोल्टेज को सीमित करें
(C) Control the motor speed
 मोटर की गति को नियंत्रित करें
(D) Limit the armature current
 आर्मेचर करंट को सीमित करें

48.  Which type of instrument is used to test the armature winding?
आर्मेचर वाइंडिंग का परीक्षण करने के लिए किस प्रकार के उपकरण का प्रयोग किया जाता है?  [Bharat Skill QB]

(A) Megger
 मेगर
(B) Growler
 ग्राउलर
(C) Multimeter
 मल्टीमीटर
(D) Ohmmeter
 ओह्ममीटर

49.  Why the holding coil of a 3 point starter is connected in series with shunt field?
3 पॉइंट स्टार्टर के होल्डिंग कॉइल को शंट फ़ील्ड के साथ श्रंखला में क्यों जोड़ा जाता है?  [Bharat Skill QB]

(A) To limit the load current
 लोड करंट को सीमित करने के लिए
(B) To run motor at low voltage
 कम वोल्टेज पर मोटर चलाने के लिए
(C) To hold the handle plunger firmly
 प्लंजर को ठीक से पकड़ने के लिए
(D) To protect the motor if the field opens
 फ़ील्ड खुलने पर मोटर की सुरक्षा के लिए

50.  What is the best method to change the DOR of a compound motor without change of its characteristics?
किसी यौगिक मोटर की विशेषताओं के बिना बदले, DOR बदलने के लिए सबसे अच्छी विधि क्या है?  [Bharat Skill QB]

(A) Change armature current direction
 आर्मेचर धारा दिशा बदलें
(B) Change shunt field current direction
 शंट फ़ील्ड धारा दिशा बदलें
(C) Change series field current direction
 श्रेणी फ़ील्ड धारा दिशा बदलें
(D) Change the current in armature and shunt field together
 आर्मेचर और शंट फील्ड में करंट को एक साथ बदलें